LSR Zero Zero Compact

X Template

ZERO·ZERO

Introducing the ZERO·ZERO X Template. Your line, face and arc in one A4 plate.

ZERO·ZERO X Template

Create your X Templatelive

X, the Roman numeral for 10. The X Template is built to train your 10 ft putts.*

Pick Stock L, A or B, or set your own plane, radius and angle of attack for a custom plate. See it live, front and back.

This is for demonstration purposes. Your custom plate will be fitted using our 10 data point check.

* 10 ft on a Stimp 10 green, with entry speed to roll 1 ft past the hole.

ColourLime Stockor Head
Pick L, A or B, or drag the sliders for custom
Side
X · Stock A
Arc12.00°/M
Swing direction0.81° R
Low point67.9 mm
Face at P2 / P41.20°
Face at P1 / P53.20°
Size296 × 200 mm

Zero faceZero pathAt impactBy design

See the stroke

Dial in your10 ft putts

The X Template trains the all-important 10 ft range. A built-in head gate for the Tiger gate drill, a P1 face check and your low point, all on one plate.

Matching plane board
Putter at the ball.
10 ftP1 26.7 cm
Stimpmeter stroke length

Stroke lengthmarks

The triple lines at P1 mark your Stimpmeter stroke length: the stroke that rolls the ball the same distance as a Stimpmeter, 10 ft on a stimp 10 green. P1 sits 26.7 cm from P0. Turn the plate over for P5 on the through stroke.

  1. Triple lines at P1

    Your 10 ft stroke, 26.7 cm back.

  2. P5 on the back

    The same length through.

  3. Face angle at P1

    Printed above the lines, for your arc.

  4. Same tempo

    Back 700 ms, down 333 ms.

Front P0 · P2 · P1
Back P3 · P4 · P5
On the plate

Every markhas a job

  1. Ball notch

    47 mm wide. The ball sits on the green and rolls out clean.

  2. Head gate

    Tee slots 55 to 70 mm either side of the line.

  3. P0 · P1 · P5 slits

    Mark your line and face angles with a chalk pen.

  4. Arc slot

    Marks your arc inside P1.

  5. cvg slot and hole

    Your low point, where swing direction, path and face match.

  6. String line target

    Bold white line, grey lines 4 mm either side.

  7. Hold-down tees

    Two tee holes keep the plate still.

  8. A4 size

    296 × 200 mm. Front P0 · P2 · P1, back P3 · P4 · P5.

Custom

Custom fittingin three steps

01

Data capture

Using data from SAM PuttLab / TrackMan, we accurately measure your radius, sweet spot D plane and attack angle, along with a static radius measurement. All numbers are double checked for accuracy.

02

Custom fit

We work out your arc in degrees per metre, your face angles at P1 to P5 and your low point.

03

Your plate

Your X Template is printed and laser cut to your fit. Stock L, A and B are ready to go.

Pre-order

Unlock yourpotential

Leave your name and email and we will contact you about your ZERO·ZERO X Template.