LSR Zero Zero V Template

V Template

ZERO·ZERO

Introducing the ZERO·ZERO V Template. Your line, face and arc for the 5 ft putt.

ZERO·ZERO V Template

Create your V Templatelive

V, the Roman numeral for 5. The V Template is built to train your 5 ft putts.*

Pick Stock L, A or B, or set your own plane, radius and angle of attack for a custom plate. See it live.

This is for demonstration purposes. Your custom plate will be fitted using our 10 data point check.

* 5 ft on a Stimp 10 green, with entry speed to roll 1 ft past the hole.

ColourLime Stockor Head
Pick L, A or B, or drag the sliders for custom
V · Stock A
Arc12.00°/M
Swing direction0.81° R
Low point67.9 mm
Face at 5 ft back2.36°
Face at 5 ft through2.36°
Size414 × 200 mm

Zero faceZero pathAt impactBy design

See the stroke

Dial in your5 ft putts

The V Template trains the putts you have to make. The ball sits in the plate, with a head gate at the ball and at the finish, a face check back and through, and your low point, all on one plate.

Matching plane board
Putter at the ball.
5 ft19.7 cm each way
Stimpmeter stroke length

Stroke lengthmarks

The triple lines at 19.7 cm mark your Stimpmeter stroke for 5 ft: the stroke that rolls the ball 5 ft on a stimp 10 green, 1 ft past the hole. Back and through are both on the plate, at the same length.

  1. Triple lines back

    Your 5 ft stroke, 19.7 cm back.

  2. Triple lines through

    The same length through, with the second head gate.

  3. Face angle at 5 ft

    Printed above the lines, for your arc.

  4. Same tempo

    Back 700 ms, down 333 ms.

Plate P0 · 5 ft back · 5 ft through
On the plate

Every markhas a job

  1. Ball seat

    The ball sits on the green, held within 3 mm.

  2. Open front

    Cut out to the front edge, so the ball rolls away clean.

  3. Two head gates

    Tee slots 55 to 70 mm, at the ball and on the 5 ft line through.

  4. P0 · 5 ft slits

    3.1 mm cuts: mark your line and face angles with a chalk pen.

  5. Heel · centre · toe

    Arc slots at 5 ft for an L.A.B. head, 55 mm centre to heel and toe.

  6. cvg slot and hole

    Your low point, where swing direction, path and face match.

  7. String line target

    Bold white line, grey lines 4 mm either side.

  8. Hold-down tees

    Four tee holes keep the plate still.

Custom

Custom fittingin three steps

01

Data capture

Using data from SAM PuttLab / TrackMan, we accurately measure your radius, sweet spot D plane and attack angle, along with a static radius measurement. All numbers are double checked for accuracy.

02

Custom fit

We work out your arc in degrees per metre, your face angles at 5 ft and your low point.

03

Your plate

Your V Template is printed and laser cut to your fit. Stock L, A and B are ready to go.

Pre-order

Unlock yourpotential

Leave your name and email and we will contact you about your ZERO·ZERO V Template.