Shaft plane board

ZERO·ZERO

Introducing the ZERO·ZERO Shaft plane board. Your SA lines, 15 cm up, where the shaft rides.

ZERO·ZERO

Create yourShaft plane board

Select plane, radius and angle of attack. See the face of your ZERO·ZERO Shaft plane board redraw live. The SA (shaft angle) lines are accurately drawn according to your shaft lean, head onset, OP point and AoA.

This is for demonstration purposes. Your board will be fitted using our 10 point data check.

ColourLimeHeadShaft lean P0
CenterAngleOP point below pivotSA linesP linesShaft windowsSA colourCVG lineLine widthZERO·ZEROShaft start line
Target →
Drag the sliders to your specification
Your custom specifications
Board angle70°
D Plane74.8°
Arc12.00°/M
Low point67.8 mm
HeadVZN1
Shaft lean P01.5°
Onset23 mm
OP pointPivot
SA linesFull
Line spacing19.3 mm
Dimensions L × F × H860 × 80 × 225 mm
Radius viewer
ZERO·ZERO
Attack angle
Radius
OP point below pivot
Shaft lean P0
Rail center
Swing
Effective loft
Onset
 
D-plane
Spin loft
Launch.87 DL + .13 AoA
View
Scroll for more ▾

Zero faceZero pathAt impactBy design

With the plane board

Build a rock solidstroke

No two players swing on the same arc. Your board should not be the same either.

With the plane board
Plane board

One set ofSA lines

The shaft plane board carries the same SA lines as your ZERO·ZERO Custom plane board. Same head, same shaft lean, same OP point. The plane board sets the head, the shaft plane board sets the shaft. Use one, or both.

Seen square to the boards. The shaft lies on the same SA line on both boards, all the way through the stroke.
Matching template
Fitting

Optimal custom fittingin three steps

01

Data capture

Using data from SAM PuttLab / TrackMan, we accurately measure your radius, sweet spot D plane and attack angle, along with a static radius measurement. All numbers are double checked for accuracy.

02

Custom fit

This process lets our experts calculate your optimal arc in degrees per metre and radius, as well as foot position for a consistent set-up.

03

Unique to LSR

From the data we know your shaft lean and OP point, and the SA lines that keep the face square to your arc, on the plane board and the shaft plane board.

Made to measure

Unlock yourpotential

Leave your name and email and we will contact you to book your custom fitting.