Custom Template+ & Custom arc rail

ZERO·ZERO

Introducing the ZERO·ZERO Custom Template+ and Custom arc rail. Built from one specification, made to fit together.

ZERO·ZERO

Create your Template+ & Arc Raillive

Select plane, radius and angle of attack. Your Template+ and your rail are drawn live from the same numbers, the same way we build them. Whatever the fit, the rail face sits on the 60 mm heel arc.

This is for demonstration purposes. Your Template+ and rail are fitted using our 10 data point check.

Drag the sliders to your specification
Your Template+ and rail
Arc12.23°/M
Swing direction0.55° R
Low point44.9 mm
FitPerfect fit
Template+ & arc rail

Made to fittogether

Your Custom Template+ and your Custom arc rail are built from the same specification. They match perfectly, from arc to low point. Aligned perfectly to the centre of the putter face.

Your custom Template+.
60 MM
ZERO·ZERO

Zero faceZero pathAt impactBy design

See 3D view
Built to one spec

Template+and rail

One fit makes the Template+, the rail and the rail cover. Every part is checked against the others before it is made.

  • Template+ 820 x 220 mm

    100 mm on the target side, 120 mm on your side for the rail zone.

  • Fan lines to the rail

    Every fan line runs 60 mm from the arc and meets the rail face.

  • Rail 820 x 50 x 120 mm

    Straight back, curved face. 50 mm deep at the ball, thinner at the ends where your arc swings in.

  • Low point marked

    The CVG point on the template and the LOW PT mark on the rail line up.

  • Printed cover

    The swoosh on the rail face is your 3D arc seen from the side.

Example fitValue
Arc12.23°/M
Radius1240 mm
Swing direction0.55° R
Low point44.9 mm
Rail at the ball50.0 mm
Rail at the ends32.0 mm

The animation shows this fit. Yours is made from your own SAM PuttLab data.

ZERO·ZERO

Get fittedfor yours

Your Template+ and rail are made to your stroke. Book a custom fitting and we build both from your data.

Custom arc rail →See 3D view